Comparison to other standards

If you compare TORX®TTAP® with other recess in the market, you will easily understand and - feel the differene - how TORX TTAP makes screw driving more easy.

Below we have illustrated the major difference between TTAP® and most popular screw recesses in the market.

If you compare with Phillips / Pozidriv® recess, a major advantage is that you don't need to apply as much pressure to drive the screw, hence - ttap reduces worker fatique.

TORX®TTAP® has several advantages over the TORXALIGN system. The attached video shows some of the benefits. You can also download the flash file from here.

1. The small angle between top one side and bottom opposite side makes bit wobble.

2. Increased angle between top one side and bottom opposite side make stability.

TORX® IS TTAP® COMPATIBLE:

  • TTAP® is 100 % a TORX® recess, backward convertible - but without the disadvantages
  • you can use TORX® bits on TORX®TTAP® screw, hence strategically easy to change to TTAP®

 

1. Cam out 2. Drive angle perpendicular to axis of fastener. No cam out.

TTAP® SAVES YOUR BODY

  • No need to push - by using TTAP® no end-load on screwdriver needed
  • If you compare with Phillips / Pozidriv® recess, a major advantage is that you don't need to apply as much pressure to drive the screw, hence - ttap reduces worker fatique

 

 

1. Line Contact 2. Broad engagement surfaces

©2013 TTAP Drive AS | All rights reserved | Site map | Mediabank | Terms of use | Subscribe to newsletter

TTAP® is a registered tradename of TtapDrive AS - TORX® is a registered tradename of Acument Global Technologies.